EXPERT'S EDGE


"The greatest barrier to success is the fear of failure"

by:Sven Goran Eriksson

Friday, January 22, 2010

Mesh Topology(electronics seminar topics)

According to the San Francisco-based market research and consulting firm, Internet traffic will have reached 350,000 Terabytes per month as we pass into the new millennium. This is a significant milestone, as it indicates that data has already surpassed the voice network. To keep pace with seemingly insatiable demand for higher-speed access, a huge, complex, network-building process is beginning. Decisions made by network Architects today will have an immense impact on the future profitability, flexibility, and competitiveness of network operators. Despite the dominance of synchronous optical network (SONET), a transport technology based on time division multiplexing (TDM), more and more operators consider adopting a point-to-point strategy and eventual mesh topology. This article highlights the key advantages of this new approach.

With such strong demand for wideband access - 1.5 million house holds already have cable or digital subscriber line (DSL) modern capable of operating at 1 Mbps - there is no doubt that the future for service providers is extremely bright. However, there are a number of more immediate challenges that must be addressed. At the top of the list is the fact they network investments must be made before revenues are realized. As a result, there is a need for less complex and more efficient network builds. In an effort to cut network costs, action is being taken across several fronts: consolidating network elements, boosting reliability, reducing component system costs, and slashing operational costs. As far as optical networks are concerned, the action likely to made the most positive impact is the development of new network architectures, such as point-to-point/mesh designs. Ring architectures will still be supported, but new Internet protocol (IP) and asynchronous transfer mode (ATM) networks will find that mesh, with its well- defined optical nodes, lends itself to robust optical rerouting schemes

2. POINT-TO-POINT OR MESH TOPOLOGIES IN THE METRO OPTICAL NETWORK

Definition
According to point-to-point topology, one node connects directly to another node. Mesh is a network architecture that improves on point-to-point topology by providing each node with a dedicated connection to every other node.

This article highlights the key advantages of adopting a point-to-point strategy and eventual mesh topology, a new approach in transport technology.

Topology

It is the method of arranging various devices in a network. Depending on the way in which the devices are interlinked to each other, topologies are classified into:-

" Star
" Ring
" Bus
" Tree
" Mesh

Of the above mentioned types, the most popular & advantag
eous is the mesh topology.

FPGA (electronics seminar topic)

A quiet revolution is taking place. Over the past few years, the density of the average programmable logic device has begun to skyrocket. The maximum number of gates in an FPGA is currently around 500,000 and doubling every 18 months. Meanwhile, the price of these chips is dropping. What all of this means is that the price of an individual NAND or NOR is rapidly approaching zero! And the designers of embedded systems are taking note. Some system designers are buying processor cores and incorporating them into system-on-a-chip designs; others are eliminating the processor and software altogether, choosing an alternative hardware-only design.

As this trend continues, it becomes more difficult to separate hardware from software. After all, both hardware and software designers are now describing logic in high-level terms, albeit in different languages, and downloading the compiled result to a piece of silicon. Surely no one would claim that language choice alone marks a real distinction between the two fields. Turing's notion of machine-level equivalence and the existence of language-to-language translators have long ago taught us all that that kind of reasoning is foolish. There are even now products that allow designers to create their hardware designs in traditional programming languages like C. So language differences alone are not enough of a distinction.

Both hardware and software designs are compiled from a human-readable form into a machine-readable one. And both designs are ultimately loaded into some piece of silicon. Does it matter that one chip is a memory device and the other a piece of programmable logic? If not, how else can we distinguish hardware from software?

Regardless of where the line is drawn, there will continue to be engineers like you and me who cross the boundary in our work. So rather than try to nail down a precise boundary between hardware and software design, we must assume that there will be overlap in the two fields. And we must all learn about new things. Hardware designers must learn how to write better programs, and software developers must learn how to utilize programmable logic.

TYPES OF PROGRAMMABLE LOGIC

Many types of programmable logic are available. The current range of offerings includes everything from small devices capable of implementing only a handful of logic equations to huge FPGAs that can hold an entire processor core (plus peripherals!). In addition to this incredible difference in size there is also much variation in architecture. In this section, I'll introduce you to the most common types of programmable logic and highlight the most important features of each type.

PLDs

At the low end of the spectrum are the original Programmable Logic Devices (PLDs). These were the first chips that could be used to implement a flexible digital logic design in hardware. In other words, you could remove a couple of the 7400-series TTL parts (ANDs, ORs, and NOTs) from your board and replace them with a single PLD. Other names you might encounter for this class of device are Programmable Logic Array (PLA), Programmable Array Logic (PAL), and Generic Array Logic (GAL).

Wednesday, January 20, 2010

HVAC(seminar topics for EC students)

Definition

Wireless transmission of electromagnetic radiation (communication signals) has become a popular method of transmitting RF signals such as cordless, wireless and cellular telephone signals, paper signals, two way radio signals,video conferencing signals and LAN signals indoors.

Indoor wireless transmission has the advantage that building in which transmission is taking place does not have to be filled with wires or cables that are equipped to carry a multitude of signals. Wires and signals are costly to install and may require expensive upgrades when their capacity is exceeded or when new technologies require different types of wires and cables than those already installed.

Traditional indoor wireless communication systems transmit and receive signals through the use of a network of transmitters, receivers and antennas that are placed through out the interior of a building. Devices must be located such that signals must not be lost or signal strength may not get attenuated. Again a change in the existing architecture also affects the wireless transmission. Another challenge related to installation of wireless networks in buildings is the need to predict the RF propagation and coverage in the presence of complex combinations of shapes and materials in the buildings.

In general, the attenuation in buildings is larger than that in free space, requiring more cells and higher power to obtain wider coverage. Despite of all these, placement of antennas, receivers and antennas in an indoor environment is largely a process of trial and error. Hence there is need for a method and a system for efficiently transmitting RF and microwave signals indoors without having to install an extensive system of wires and cables inside the buildings.

This paper suggests an alternative method of distributing electromagnetic signals in buildings by the recognition that every building is equipped with an RF wave guide distribution system, the HVAC ducts. The use of HVAC ducts is also amenable to a systematic design procedure but should be significantly less expensive than other approaches since existing infrastructure is used and RF is distributed more efficiently.

smart card(electronics seminar topics)

Definition

In this seminar ,is giving some basic concepts about smart cards. The physical and logical structure of the smart card and the corresponding security access control have been discussed in this seminar . It is believed that smart cards offer more security and confidentiality than the other kinds of information or transaction storage. Moreover, applications applied with smart card technologies are illustrated which demonstrate smart card is one of the best solutions to provide and enhance their system with security and integrity.

The seminar also covers the contactless type smart card briefly. Different kinds of scheme to organise and access of multiple application smart card are discussed. The first and second schemes are practical and workable on these days, and there is real applications developed using those models. For the third one, multiple independent applications in a single card, there is still a long way to go to make it becomes feasible because of several reasons.

At the end of the paper, an overview of the attack techniques on the smart card is discussed as well. Having those attacks does not mean that smart card is unsecure. It is important to realise that attacks against any secure systems are nothing new or unique. Any systems or technologies claiming 100% secure are irresponsible. The main consideration of determining whether a system is secure or not depends on whether the level of security can meet the requirement of the system.

The smart card is one of the latest additions to the world of information technology. Similar in size to today's plastic payment card, the smart card has a microprocessor or memory chip embedded in it that, when coupled with a reader, has the processing power to serve many different applications. As an access-control device, smart cards make personal and business data available only to the appropriate users. Another application provides users with the ability to make a purchase or exchange value. Smart cards provide data portability, security and convenience. Smart cards come in two varieties: memory and microprocessor.

Memory cards simply store data and can be viewed as a small floppy disk with optional security. A microprocessor card, on the other hand, can add, delete and manipulate information in its memory on the card. Similar to a miniature computer, a microprocessor card has an input/output port operating system and hard disk with built-in security features. On a fundamental level, microprocessor cards are similar to desktop computers. They have operating systems, they store data and applications, they compute and process information and they can be protected with sophisticated security tools. The self-containment of smart card makes it resistant to attack as it does not need to depend upon potentially vulnerable external resources. Because of this characteristic, smart cards are often used in different applications, which require strong security protection and authentication.


edge(electronics seminar topic)

Introduction
EDGE is the next step in the evolution of GSM and IS- 136. The objective of the new technology is to increase data transmission rates and spectrum efficiency and to facilitate new applications and increased capacity for mobile use. With the introduction of EDGE in GSM phase 2+, existing services such as GPRS and high-speed circuit switched data (HSCSD) are enhanced by offering a new physical layer. The services themselves are not modified. EDGE is introduced within existing specifications and descriptions rather than by creating new ones. This paper focuses on the packet-switched enhancement for GPRS, called EGPRS. GPRS allows data rates of 115 kbps and, theoretically, of up to 160 kbps on the physical layer. EGPRS is capable of offering data rates of 384 kbps and, theoretically, of up to 473.6 kbps.

A new modulation technique and error-tolerant transmission methods, combined with improved link adaptation mechanisms, make these EGPRS rates possible. This is the key to increased spectrum efficiency and enhanced applications, such as wireless Internet access, e-mail and file transfers.

GPRS/EGPRS will be one of the pacesetters in the overall wireless technology evolution in conjunction with WCDMA. Higher transmission rates for specific radio resources enhance capacity by enabling more traffic for both circuit- and packet-switched services. As the Third-generation Partnership Project (3GPP) continues standardization toward the GSM/EDGE radio access network (GERAN), GERAN will be able to offer the same services as WCDMA by connecting to the same core network. This is done in parallel with means to increase the spectral efficiency. The goal is to boost system capacity, both for real- time and best-effort services, and to compete effectively with other third-generation radio access networks such as WCDMA and cdma2000.

Technical differences between GPRS and EGPRS

Introduction
Regarded as a subsystem within the GSM standard, GPRS has introduced packet-switched data into GSM networks. Many new protocols and new nodes have been introduced to make this possible. EDGE is a method to increase the data rates on the radio link for GSM. Basically, EDGE only introduces a new modulation technique and new channel coding that can be used to transmit both packet-switched and circuit-switched voice and data services. EDGE is therefore an add-on to GPRS and cannot work alone. GPRS has a greater impact on the GSM system than EDGE has. By adding the new modulation and coding to GPRS and by making adjustments to the radio link protocols, EGPRS offers significantly higher throughput and capacity.

GPRS and EGPRS have different protocols and different behavior on the base station system side. However, on the core network side, GPRS and EGPRS share the same packet-handling protocols and, therefore, behave in the same way. Reuse of the existing GPRS core infrastructure (serving GRPS support node/gateway GPRS support node) emphasizes the fact that EGPRS is only an "add-on" to the base station system and is therefore much easier to introduce than GPRS . In addition to enhancing the throughput for each data user, EDGE also increases capacity. With EDGE, the same time slot can support more users. This decreases the number of radio resources required to support the same traffic, thus freeing up capacity for more data or voice services. EDGE makes it easier for circuit-switched and packet-switched traffic to coexist, while making more efficient use of the same radio resources. Thus in tightly planned networks with limited spectrum, EDGE may also be seen as a capacity booster for the data traffic.

EDGE technology
EDGE leverages the knowledge gained through use of the existing GPRS standard to deliver significant technical improvements. Figure 2 compares the basic technical data of GPRS and EDGE. Although GPRS and EDGE share the same symbol rate, the modulation bit rate differs. EDGE can transmit three times as many bits as GPRS during the same period of time. This is the main reason for the higher EDGE bit rates. The differences between the radio and user data rates are the result of whether or not the packet headers are taken into consideration. These different ways of calculating throughput often cause misunderstanding within the industry about actual throughput figures for GPRS and EGPRS. The data rate of 384 kbps is often used in relation to EDGE. The International Telecommunications Union (ITU) has defined 384 kbps as the data rate limit required for a service to fulfill the International Mobile Telecommunications-2000 (IMT-2000) standard in a pedestrian environment. This 384 kbps data rate corresponds to 48 kbps per time s
lot, assuming an eight-time slot terminal.

Optic Fibre Cable(electronics seminar topics)

Optical fiber (or "fiber optic") refers to the medium and the technology associated with the transmission of information as light pulses along a glass or plastic wire or fiber. Optical fiber carries much more information than conventional copper wire and is in general not subject to electromagnetic interference and the need to retransmit signals. Most telephone company long-distance lines are now of optical fiber.

Transmission on optical fiber wire requires repeaters at distance intervals. The glass fiber requires more protection within an outer cable than copper. For these reasons and because the installation of any new wiring is labor-intensive, few communities yet have optical fiber wires or cables from the phone company's branch office to local customers (known as local loops).

Optical fiber consists of a core, cladding, and a protective outer coating, which guide light along the core by total internal reflection. The core, and the higher-refractive-index cladding, are typically made of high-quality silica glass, though they can both be made of plastic as well. An optical fiber can break if bent too sharply. Due to the microscopic precision required to align the fiber cores, connecting two optical fibers, whether done by fusion splicing or mechanical splicing, requires special skills and interconnection technology.

Metamorphic Robots(electronics seminar topics)

Robots out on the factory floor pretty much know what's coming. Constrained as they are by programming and geometry, their world is just an assembly line. But for robots operating out doors, away from civilization, both mission and geography are unpredictable. Here, robots with the ability to change their shape could adapt to constantly varying terrain.

Metamorphic robots are designed so that they can change their external shape without human intervention. One general way to achieve such functionality is to build a robot composed of multiple, identical unit modules. If the modules are designed so that they can be assembled into rigid structures, and so that individual units within such structures can be relocated within and about the structure, then self-reconfiguration is possible.

These systems claim to have many desirable properties including versatility, robustness and low cost. Each module has its own computer, a rich set of sensors, actuators and communication networks. However, the practical application outside of research has yet to be seen .One outstanding issue for such systems is the increasing complexity for effectively programming a large distributed system, with hundreds or even thousands of nodes in changing configurations. PolyBot has been developed through as third generation at the Xerox Palo alto Research Center. Conro robot built at the information sciences institute at the University of Southern California are examples for metamorphic robots.

SELF-RECONFIGURATION THROUGH MODULARITY

Modularity means composed of multiple identical units called modules. The robot is made up of thousands of modules. The systems addressed here are automatically reconfiguring, and for this the hardware systems that tend to be more homogenous than heterogenous. That is the system may have different types of modules but the ratio of the number of module types to the number of modules is very low. Systems with all of these characteristics are called n-modular where n refers to the number of module types and n is small typically one or two. (e.g. a system with two types of modules is called 2-modular ).

The general philosophy is to simplify the design and construction of components while enhancing functionality and versatility through larger numbers of modules. Thus, the low heterogeneity of the system is a design leverage point getting more functionality for a given amount of design .The analog in architecture is the building of a cathedral from many simple bricks in which bricks are of few types .In nature. The analogy is complex organisms like mammals, which have billions of cells, but only hundreds of cell types.

3 shows an earthworm type to slither through obstacles..